Brother PS-300B, Инструкция по эксплуатации

Страница: 102 / 164

102/164
3. Do any of the following:
To add codes to a point, select a code in the Code List box, and then click .
To remove a code from a point, select the code in the Selected Code List box, and
then click .
4. Repeat step 3 if needed.
5. If you want to add codes to another point, click the point and follow step 3. Repeat this
step if you prefer.
6. Click the Close button to close the window.
NOTE: If a machine model is already specified, Show selected machine ’s codes is selected as
default when opening the Code Setting dialog box. Select Show all codes if you want to
use codes other than those specified for the selected model. When outputting, the codes
which are not specified for the selected model cannot be outputted.
NOTE: To show the codes of the specified point without opening the Code Setting dialog box:
Select the point with the Select Point tool, then while holding down the keyboard’s Shift
key, move the pointer onto the point. A list appears to show the codes applied to the
point. Right-click to clear the list.
The codes and their functions
Code Function
Trim Trims threads.
Tack Activates/Deactivates the needle deflection.
Deceleration Decelerates the maximum sewing speed.
Select the desired speed from 8 levels.
Select “OFF” to set the maximum sewing speed to the
max.