Mechanical handling
X90 mobile system User's manual V 1.20 - Translation of the original manual
27
Figure 13: Mating connector X1 - Row specifications
Push the cable into mating connector X1 with the "push-click-pull" method while taking the latch keying into account.
Coding
Latch
Latch
0.6 mm
1.5 mm
Figure 14: Inserting the cable (image by Molex)
Lock mating connector X1 again by pushing the gray latch back into mating connector X1.
Figure 15: Locking mating connector X1
Information:
If the gray latch jams when trying to push it in, then a cable or blind plug is not inserted properly. The
row in which this cable / blind plug is inserted can be identified from the gray latch.
Lock the wire cap to mating connector X1 (over the gray latch) and pull it over the connector until it locks into place.
Figure 16: Installing the wire cap
