System characteristics
14
X90 mobile system User's manual V 1.20 - Translation of the original manual
Address assignment takes place implicitly through the slot. Once software has been created, it is valid for all
variants and does not have to be changed. This is even possible with subsequent machine expansion.
Digital input modules
•
Up to 10 inputs
•
Positive switching
•
Negative switching
•
Configurable thresholds
•
Countable
•
Encoder signal
•
Diagnostics-capable
Analog input modules
•
Up to 8 inputs
•
0 to 20 mA
•
Additionally switchable to 0 to 32 V
•
0 to 2000 Ω
•
Temperature measurement
•
Ratiometric measurement
•
Diagnostics-capable
Analog output modules
•
Up to 8 outputs
•
0.25 to 20 mA
•
0.1 to 10 V
•
Diagnostics-capable
Motor modules
•
Up to 8 outputs
•
Up to 4 A per output
•
Parallel connection of outputs
•
Diagnostics-capable
Special-purpose modules
•
Interface modules
•
Special-purpose sensors
•
Hydrostatic control
•
Mixed modules
•
Condition monitoring
2.10 Flexibility for options
With the support of B&R Automation Studio, there is an optimized solution using I/O mapping.
Each I/O configuration is optimally created. However, the application software is already designed for all options.
Only the I/O channels that are actually available are mapped to the application program. If an expansion is required,
the additionally required hardware is simply connected and the mapping of the I/Os is changed.
It does not matter where the I/O mapping list is created:
•
Manually in B&R Automation Studio
•
With tools, e.g. with a database or a table calculation program
•
Directly from an ERP system, just like the parts list for the machine
•
Automatically in the application software, depending on the hardware used
