manualshive.com logo in svg

Autodesk AUTOCAD 2006, Справочник по командам, Страница: 923 / 1490

Поделиться
Скачать
Autodesk AUTOCAD 2006 Скачать руководство пользователя страница 923

size that is larger than the paper sizes offered in the Plotter Configuration
Editor, verify that the plotter is capable of plotting the new dimensions.

■

Add: Starts the Custom Paper Size wizard. When you add a paper size,
you can either create a new paper size from scratch or create a new one
based on the listing of available paper sizes for the selected configured
plotter. The new paper size is a user-defined size, not a standard size.

■

Delete: Deletes the selected custom paper size from the list.

■

Edit: Starts the Custom Paper Size wizard, where you can modify the
selected paper size. You can change any of the custom paper size settings.

Duplex Printing

Determines double-sided printing and binding margin. Binding margin
options are available only for plotters that support duplex printing.

■

None: Indicates no double-sided printing.

■

Short Side: Places the binding margin on the short side of the paper.

■

Long Side: Places the binding margin on the long side of the paper.

Filter Paper Sizes

Filters the list of paper sizes displayed for the plotting device selected in the
Plot and Page Setup dialog boxes. The list of paper sizes is displayed on the
Plot Settings tab in the Plot dialog box and on the Layout Settings tab in
the Page Setup dialog box. Select the paper sizes you want to display for
this device.

■

Check All: Hides all the paper sizes for the device.

■

Uncheck All: Displays all the paper sizes for the device.

Installed Memory

Provides the program with the amount of total memory (RAM) installed
on a nonsystem plotter. This option is only available for nonWindows
system printers that accept optional memory. If your plotter has extra
memory, specify the total amount of memory.

■

Total Installed Memory: Specifies the total installed memory in megabytes.
The plotter driver uses the memory information to determine whether
banding or image quality degradation is required to prevent the system
from running out of memory.

Plotter Configuration Editor | 899

Содержание AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов