Autodesk AUTOCAD 2006, Справочник по командам, Страница: 1128 / 1490

NOTE SOLDRAW is defined by the acsolids.arx application and is intended to be
used only interactively. For information about using this command from an
application, see “Externally Defined Commands” in the AutoLISP Reference.
SOLID
Creates solid-filled triangles and quadrilaterals
Surfaces toolbar:
Draw menu: Surfaces
➤
2D Solid
Command line: solid
Specify first point: Specify a point (1)
Specify second point: Specify a point (2)
The first two points define one edge of the polygon.
Specify third point: Specify a point (3) diagonally opposite the second
Specify fourth point or <exit>: Specify a point (4) or press ENTER
1
2
4
3
Pressing ENTER at the Fourth Point prompt creates a filled triangle. Specifying
a point (5) creates a quadrilateral area.
The last two points form the first edge of the next filled area. The Third Point
and Fourth Point prompts are repeated. Specifying successive third and fourth
points creates further connected triangles and four-sided polygons in a single
solid object. Pressing ENTER ends SOLID.
2D solids are filled only when the FILLMODE system variable is on and the
viewing direction is orthogonal to the 2D solid.
1104 | Chapter 20