manualshive.com logo in svg

Autodesk AUTOCAD 2006, Справочник по командам, Страница: 1163 / 1490

Поделиться
Скачать
Autodesk AUTOCAD 2006 Скачать руководство пользователя страница 1163

The point is added, and the spline is refitted through the new set of points.

selected point

new point

result

Close/Open

If the selected spline is closed, the Close option is replaced by the Open option.

Close

Closes an open spline and makes it tangent continuous (smooth) at its
endpoints. If the spline’s start point and endpoint are the same, this option
makes the spline tangent continuous at both points.

open spline

closed spline

tangent

continuity

Open

Opens a closed spline. If the spline’s start point and endpoint were the same
before you used the Close option to make it tangent continuous at both
points, the Open option returns the spline to its original state. The start
point and endpoint remain the same but lose their tangent continuity
(smoothness).

If the spline was open (its start point and endpoint were not the same)
before you used the Close option to make it tangent continuous where the
start point and endpoint meet, this option returns the spline to its original
open state and removes tangent continuity.

Change Dictionaries Dialog Box | 1139

Содержание AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов