Autodesk AUTOCAD 2006, Справочник по командам, Страница: 748 / 1490

Title Block
Prepares paper space, orients the drawing by setting the origin, and creates a
drawing border and a title block.
Enter title block option [Delete objects/Origin/Undo/Insert] <Insert>: Enter an
option or press ENTER
Delete Objects
Deletes objects from paper space.
Select the objects to delete . . .
Select objects: Use an object selection method
Origin
Relocates the origin point for this sheet.
Specify new origin point for this sheet: Specify a point
Undo
Reverses operations performed in the current MVSETUP session.
Insert
Displays title block options.
Available title blocks:...
0: None
1: ISO A4 Size(mm)
2: ISO A3 Size(mm)
3: ISO A2 Size(mm)
4: ISO A1 Size(mm)
5: ISO A0 Size(mm)
6: ANSI-V Size(in)
7: ANSI-A Size(in)
8: ANSI-B Size(in)
9: ANSI-C Size(in)
10: ANSI-D Size(in)
11: ANSI-E Size(in)
12: Arch/Engineering (24 x 36in)
13: Generic D size Sheet (24 x 36in)
Enter number of title block to load or [Add/Delete/Redisplay]: Enter an option
number ( 0 through 13 ) or enter an option
724 | Chapter 14