Autodesk AUTOCAD 2006, Справочник по командам, Страница: 1314 / 1490

Entering the name of an existing block writes that block to a file. You cannot
enter the name of an external reference (xref) or one of its dependent blocks.
Entering an equal sign ( = ) specifies that the existing block and the output file
have the same name. If no block of that name exists in the drawing, the
prompt is displayed again.
Entering an asterisk ( * ) writes the entire drawing to the new output file, except
for unreferenced symbols. Model space objects are written to model space,
and paper space objects are written to paper space.
If you press ENTER , you are prompted for an insertion base point for the
block file and then prompts you to select the objects to write to the block file.
Specify insertion base point: Specify a point (1)
Select objects: Use an object selection method and press ENTER when you finish
selecting objects
1
objects selected
for a block
After the file is created, the selected objects are deleted from the drawing. You
can use OOPS to restore the objects.
In the new drawing, the world coordinate system (WCS) is set parallel to the
user coordinate system (UCS).
WEDGE
Creates a 3D solid with a sloped face tapering along the X axis
Solids toolbar:
Draw menu: Solids
➤
Wedge
Command line: wedge
Specify first Corner of Wedge or [Center] <0,0,0>: Specify a point (1), enter ce ,
or press ENTER
1290 | Chapter 24