Autodesk AUTOCAD 2006, Справочник по командам, Страница: 749 / 1490

Title Block to Load
Inserts a border and a title block. Entering 0 or pressing ENTER inserts no
border. Entering 1 through 13 creates a standard border of the appropriate
size. The list includes ANSI and DIN/ISO standard sheets.
Add
Adds title block options to the list. Selecting this option prompts you to
enter the title block description to be displayed in the list and the name of
a drawing to insert.
Enter title block description: Enter a description
Enter drawing name to insert (without extension): Enter a file name
Define default usable area? [Yes/No] <Y>: Enter n or press ENTER
Pressing ENTER displays the following prompts:
Specify lower-left corner: Specify a point
Specify upper-right corner: Specify a point
A line similar to the following example is added after the last entry in the
mvsetup.dfs default file:
A/E (24 x 18in),arch-b.dwg,(1.12 0.99 0.00),(18.63 17.02 0.00),in
The last field of the line specifies whether the title block has been created
in inches or in millimeters. The units field allows title blocks created in
either unit system to be changed by setting the unit type using the Options
option.
You can also add title blocks that have variable attributes.
Delete
Removes entries from the list.
Enter number of entry to delete from list: Enter the number of the entry to delete
Redisplay
Redisplays the list of title block options.
Undo
Reverses operations performed in the current MVSETUP session.
MVSETUP on a Layout Tab | 725