Autodesk AUTOCAD 2006, Справочник по командам, Страница: 46 / 1490

clipping planes, and then choose Create Slice. You can then move the front
and back clipping planes as one unit.
Pan
Displays the pan cursor, a hand cursor that you can use to pan the clipping
plane. Hold down the pick button and drag the cursor in any direction. The
pan cursor stays active until you click another button.
Zoom
Displays the zoom cursor, a magnifying-glass cursor that you can use to
enlarge or reduce the clipping plane. To enlarge the image, hold down the
pick button and drag the cursor toward the top of Adjust Clipping Planes
window. To reduce the image, hold down the pick button and drag the
cursor toward the bottom of the window.
Front Clipping On
Turns the front clipping plane on or off. A check mark indicates that the
front clipping plane is on, and you can see the results of moving the line
that adjusts the front clipping plane. Choose this option again to turn the
front clipping plane off and remove the check mark.
Back Clipping On
Turns the back clipping plane on or off. A check mark indicates that the
back clipping plane is on, and you can see the results of moving the line
that adjusts the back clipping plane. Choose this option again to turn the
back clipping plane off and remove the check mark.
Reset
Resets the the window and clipping plane to the extents of the drawing.
3DCONFIG
22 | Chapter 2