Autodesk AUTOCAD 2006, Справочник по командам, Страница: 198 / 1490

Description
Specifies the description for the custom property name (parameter label). This
description is displayed in the Properties palette when you select the parameter
in the Block Editor. In a drawing, when you select the custom property name
(parameter label) for the block reference in the Properties palette, the
description is displayed at the bottom of the Properties palette.
Enter horizontal distance property description: Enter a description for the horizontal
distance property of the parameter
Enter vertical distance property description: Enter a description for the vertical
distance property of the parameter
Palette
Specifies whether or not the parameter label is displayed in the Properties
palette when the block reference is selected in a drawing.
Display property in Properties palette? [Yes/No] <Yes>: Enter n or press ENTER
Value Set
Specifies a value set for the parameter. Limits the available values for the
parameter in a block reference to the values specified in the set.
Enter horizontal value set type [None/List/Increment] <None>: Specify a value set
type or press ENTER to specify no value set type
Enter vertical value set type [None/List/Increment] <None>: Specify a value set type
or press ENTER to specify no value set type
List
Specifies a list of available values for the parameter in a block reference.
Enter list of distance values (separated by commas):
Increment
Specifies a value increment and minimum and maximum values for the
parameter in the block reference.
Enter distance increment:
Enter minimum distance:
Enter maximum distance:
Rotation
Adds a rotation parameter to the current dynamic block definition and defines
a custom angle property for the block reference. Only a rotate action can be
associated with a rotation parameter.
174 | Chapter 4