Autodesk AUTOCAD 2006, Справочник по командам, Страница: 1017 / 1490

Mirror
Creates mirrored reflections when you render the material with the Photo
Real renderer or raytraced reflections when you render with the Photo
Raytrace renderer. This setting is available only for the reflection attribute.
If there is an image file specified for the reflection map, the resulting
reflection is a blend of the background and the reflection map.
Red, Green, Blue
Adjust the color’s RGB components directly. You can enter values or use
the scroll bars.
Reflection
Adjusts the material’s reflective (highlight or specular) color. You can adjust
the color using Value and the controls in the Color area. The color swatch
displays the color.
Refraction
Adjusts refraction of the object. Applies to Photo Raytrace rendering only.
You can use Value to adjust how refractive the material is. Refraction also
affects the transparency of a material.
Roughness
Adjusts the roughness or shininess of the material. Adjusting Roughness
changes the size of the material’s reflective highlight. The lower the level
of roughness, the smaller the highlight.
Transparency
Adjusts the transparency of the object. You can use Value to specify how
transparent the object is. To use an opacity map with this material, enter a
file name in Bitmap Blend.
NOTE With the Photo Real and Photo Raytrace renderers, transparency tends
to fall off as you near the edges of closed objects or when the surface normal
is perpendicular to the line of sight. The effect is that you see less background
through the edges of a hollow object than through its center. You can turn off
this effect by setting transparency to 1.0. This is especially important when you
apply opacity or texture maps in decal mode when the intention is to completely
remove any suggestion of a surface where transparency falls to 0.
Value
Changes the selected attribute. You can enter a value or use the scroll bar.
New or Modify Standard Material Dialog Box | 993