Autodesk AUTOCAD 2006, Справочник по командам, Страница: 523 / 1490

Click to Set New Origin
Specifies the new hatch origin point directly.
Custom Pattern
Lists the available custom patterns. The six most recently used custom
patterns appear at the top of the list. The name of the selected pattern is
stored in the HPNAME system variable. The Custom Pattern option is
available only if you set Type to Custom.
Default to Boundary Extents
Calculates a new origin based on the rectangular extents of the hatch.
Choices include each of the four corners of the extents and its center.
(HPORIGINMODE system variable)
Double
For user-defined patterns, draws a second set of lines positioned at 90 degrees
to the original lines, creating a crosshatch. This option is available only if
you set Type to User Defined on the Hatch tab. (HPDOUBLE system variable)
ISO Pen Width
Scales an ISO predefined pattern based on the selected pen width. This
option is available only if you set Type to Predefined and set Pattern to one
of the available ISO patterns.
Origin Preview
Shows the current location of the origin.
Pattern
Lists the available predefined patterns. The six most recently used predefined
patterns appear at the top of the list. HATCH stores the selected pattern in
the HPNAME system variable. The Pattern option is available only if you
set Type to Predefined.
Relative to Paper Space
Scales the hatch pattern relative to paper space units. Using this option,
you can easily display hatch patterns at a scale that is appropriate for your
layout. This option is available only from a layout.
Scale
Expands or contracts a predefined or custom pattern. HATCH stores the
scale in the HPSCALE system variable. This option is available only if you
set Type to Predefined or Custom.
Hatch and Gradient Dialog Box | 499