Autodesk AUTOCAD 2006, Справочник по командам, Страница: 392 / 1490

as two inches. The value does not apply to angular dimensions and is not
applied to rounding values or to plus or minus tolerance values. (DIMLFAC
system variable)
Apply to Layout Dimensions Only: Applies the measurement scale value only
to dimensions created in layout viewports. Except in unusual circumstances,
this setting should remain off. (DIMLFAC system variable)
Zero Suppression
Controls the suppression of leading and trailing zeros and of feet and inches
that have a value of zero. (DIMZIN system variable)
Zero suppression settings also affect real-to-string conversions performed
by the AutoLISP
®
rtos and angtos functions.
Leading: Suppresses leading zeros in all decimal dimensions. For example,
0.5000 becomes .5000.
Trailing: Suppresses trailing zeros in all decimal dimensions. For example,
12.5000 becomes 12.5, and 30.0000 becomes 30.
0 Feet: Suppresses the feet portion of a feet-and-inches dimension when the
distance is less than one foot. For example, 0'-6 1/2" becomes 6 1/2".
0 Inches: Suppresses the inches portion of a feet-and-inches dimension when
the distance is an integral number of feet. For example, 1'-0" becomes 1'.
Angular Dimensions
Displays and sets the current angle format for angular dimensions.
Units Format
Sets the angular units format. (DIMAUNIT system variable)
Precision
Sets the number of decimal places for angular dimensions. DIMADEC system
variable)
Zero Suppression
Controls the suppression of leading and trailing zeros. (DIMAZIN system
variable)
Leading: Suppresses leading zeros in angular decimal dimensions. For
example, 0.5000 becomes .5000.
Trailing: Suppresses trailing zeros in angular decimal dimensions. For
example, 12.5000 becomes 12.5, and 30.0000 becomes 30.
368 | Chapter 6