Autodesk AUTOCAD 2006, Справочник по командам, Страница: 346 / 1490

Dimension Arc Line Location
Specifies the placement of the dimension line and determines the direction
to draw the extension lines. After you specify the location, DIMANGULAR
ends.
Mtext
Displays the In-Place Text Editor, which you can use to edit the dimension
text. To add a prefix or a suffix, enter the prefix or suffix text before or after
the generated measurement. Use control codes and Unicode character strings
to enter special characters or symbols. See “Control Codes and Special
Characters” on page 1194.
To edit or replace the generated measurement, delete the text, enter the new
text, and then click OK. If alternate units are not turned on in the dimension
style, you can display them by entering square brackets ([ ]). For more
information about formatting dimension text, see “Change Existing Objects”
in the User’s Guide.
The current dimension style determines the appearance of the generated
measurements.
Text
Customizes the dimension text at the command line. The generated dimension
measurement is displayed within angle brackets.
Enter dimension text <current>:
Enter the dimension text, or press ENTER to accept the generated measurement.
To include the generated measurement, use angle brackets (< >) to represent
the generated measurement. If alternate units are not turned on in the
dimension style, you can display alternate units by entering square brackets
([ ]).
Dimension text properties are set on the Text tab of the New, Modify, and
Override Dimension Style dialog boxes.
322 | Chapter 6