Autodesk AUTOCAD 2006, Справочник по командам, Страница: 124 / 1490

attributes selected
The first attribute in the selection set is marked with an X. You can change
any properties of the attribute you select.
Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>: Enter
the property to change, or p ress ENTER for the next attribute
If the original attribute was defined with aligned or fit text, the prompt does
not include Angle. The Height option is omitted for aligned text. For each of
the options except Next, ATTEDIT prompts for a new value. The X remains
on the current attribute until you move to the next attribute.
x on first attribute
x on next attribute
Value
Changes or replaces an attribute value.
Enter type of value modification [Change/Replace]: Enter c or r or press ENTER
Change
Modifies a few characters of the attribute value.
Enter string to change: Enter string to change or press ENTER
Enter new string: Enter replacement string or press ENTER
Either string can be null. The ? and * characters are interpreted literally, not
as wild-card characters.
100 | Chapter 3