Autodesk AUTOCAD 2006, Справочник по командам, Страница: 239 / 1490

Enter property to change
[Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/PLotstyle]:
NOTE The Plotstyle option is displayed only when you are using named plot styles.
If you select several objects with different values for the property you want
to change, varies is displayed as the current value.
You can change several properties at a time. The Enter Property to Change
prompt is redisplayed after each option is completed.
Color
Changes the color of the selected objects.
Enter new color [Truecolor/COlorbook]<current>: Enter a color name or a number
from 1 through 255 , enter t , enter co , enter bylayer or byblock , or press
ENTER
For example, to change a color to red, enter red or 1 . If you enter bylayer ,
the object assumes the color of the layer on which it is located. If you enter
byblock , the object inherits the color of the block of which it is a component.
True Color
Specifies a true color to be used for the selected object.
Red, Green, Blue: Enter three integer values from 0 to 255 separated by commas
to specify a true color
Color Book
Specifies a color from a loaded color book to be used for the selected object.
Enter Color Book name: Enter the name of a color book that has been installed,
such as PANTONE
If you enter a color book name, the following prompt is displayed.
Enter color name: Enter the name of a color included in the selected color book,
such as Pantone 573
Elev
Changes the Z-axis elevation of 2D objects.
Specify new elevation <current>:
You can change the elevation of an object only if all its points have the same
Z value.
Use Shortcut Functions | 215