Autodesk AUTOCAD 2006, Справочник по командам, Страница: 1198 / 1490

Enter cell width <2.50000>:
Specify insertion point or [Style/Width/Height]:
Height
Specifies a height for the table rows.
Enter minimum cell height <1 line>:
Specify insertion point or [Style/Width/Height]:
Style
Specifies a table style for the table.
Enter table style name <current>
Specify insertion point or [Style/Width/Height]:
Auto
Specifies a size and a location for the table. You can use the pointing device
or enter coordinate values on the command line. When this option is selected,
you can set the number of columns or the column width, but not both. The
number of rows and the row height depend on the size of the window you
specify.
Specify first corner or [Height]:
First Corner
Specifies the location of the upper-left corner of the table. If the table style
sets the direction of the table to read from the bottom up, the insertion
point is the lower-left corner of the table.
Specify second corner:
Height
Specifies a height for the table rows.
Enter minimum cell height <1 line>:
Specify first corner or [Height]:
Auto
Specifies a size and a location for the table. You can use the pointing device
or enter coordinate values on the command line. When this option is selected,
you can set the number of columns or the column width, but not both. The
number of rows and the row height depend on the size of the window you
specify.
Enter number of rows or [Auto] <1>:
1174 | Chapter 21