Autodesk AUTOCAD 2006, Справочник по командам, Страница: 683 / 1490

Scale
Sets the scale factor for the X, Y, and Z axes. The scale for the Z axis is the
absolute value of the specified scale factor.
Specify scale factor for XYZ axes: Enter a nonzero value
Specify insertion point:
Specify rotation angle <0>:
The rotation angle sets the angle of the individual block inserts and also sets
the angle of the entire array.
Enter number of rows (---) <1>: Enter a positive value
Enter number of columns (| | |) <1>: Enter a positive value
If you specify more than one row, the following prompt is displayed:
Enter distance between rows or specify unit cell (---): Enter a value, or specify two
points to define a box whose width and height represent the distance between rows
and between columns
If you specify more than one row, the following prompt is displayed:
Specify distance between columns ( | | | ): Enter a value or specify a distance
X
Sets the X scale factor.
Specify X scale factor: Enter a nonzero value
Specify insertion point:
Specify rotation angle <0>:
The rotation angle sets the angle of the individual block inserts and also sets
the angle of the entire array.
Enter number of rows (---) <1>: Enter a positive value
Enter number of columns (| | |) <1>: Enter a positive value
If you specify more than one row, the following prompt is displayed:
Enter distance between rows or specify unit cell (---): Enter a value, or specify two
points to define a box whose width and height represent the distance between rows
and between columns
If you specify more than one column and no unit cell, the following prompt
is displayed:
Specify distance between columns ( | | | ): Enter a value or specify a distance
Y
Sets the Y scale factor.
Specify Y scale factor: Enter a nonzero value
Specify insertion point:
Specify rotation angle <0>:
MENULOAD Command Line | 659