Autodesk AUTOCAD 2006, Справочник по командам, Страница: 902 / 1490

Status Area
Displays information about the selected plotter, printer, or PC3 file.
Update and Save PC3 File
Displays the name of the PC3 file that you are modifying for the current
layout. If you click OK without changing the name of the PC3 file, the
existing PC3 file is updated with the new printer name. If you change the
name of the PC3 file and click OK, a copy of the PC3 file is saved with the
new printer information.
PLOT Command Line
If you enter -plot at the Command prompt, the following prompt is displayed
on the command line:
Detailed plot configuration [Yes/No] <No>: Enter y or n or press ENTER
No
Indicates that you do not want a detailed plot configuration for this plot.
Enter a layout name or [?] <current>:
Enter a page setup name < >:
Enter an output device name or [?] <current>:
Write the plot to a file [Yes/No] <current>:
Enter file name: <dwgname-layoutname.plt>:
Save changes to layout [Yes/No] <No>:
Proceed with Plot [Yes/No] <Y>:
For information about these prompts, see the description for Yes.
Yes
Specifies detailed page settings for the Model tab or layout tab you are plotting.
Enter a layout name or [?] <current>: Specify the name of the layout tab you want
to plot
Enter an output device name or [?] < current >: Specify the name of the output
device to which you want to plot the Model tab or layout tab you selected
If you enter a new device name without an extension, the program assumes
that the device is a PC3 file (Autodesk
®
HDI plotter configuration file). If no
PC3 file is found, the program searches for a Windows system printer with
that device name.
Enter paper size or [?] < current >: Specify the paper size to use for the plot or enter
? to view the actual list of paper sizes defined for the plotter driver
You must specify a paper size exactly as it is defined by the plotter driver.
878 | Chapter 17