Autodesk AUTOCAD 2006, Справочник по командам, Страница: 872 / 1490

Ltype Gen set to Off
Ltype Gen set to On
Undo
Reverses operations as far back as the beginning of the PEDIT session.
3D Polyline Selection
If you select a 3D polyline, the following prompt is displayed:
Enter an option [Close/Edit vertex/Spline curve/Decurve/Undo]: Enter an option
or press ENTER
If the polyline you select is closed, Open replaces the Close option in the
prompt.
Close
Creates the closing segment of the polyline, connecting the last segment with
the first. The polyline is considered open unless you close it with Close.
Open
Removes the closing segment of the polyline. The polyline is considered closed
unless you open it with Open.
Edit Vertex
Performs various editing tasks on one vertex of the polyline and segments
that follow it.
Enter a vertex editing option
[Next/Previous/Break/Insert/Move/Regen/Straighten/eXit <current>: Enter an
option or press ENTER
Pressing ENTER accepts the current default, which is either Next or Previous.
Next
Moves the X marker to the next vertex. The marker does not wrap around
from the end to the start of the polyline, even if the polyline is closed.
848 | Chapter 17