Autodesk AUTOCAD 2006, Справочник по командам, Страница: 170 / 1490

Polar Stretch Action
Runs the BACTIONTOOL command, Polar Stretch action option, which
adds a polar stretch action to the dynamic block definition when you
associate the action with a polar parameter. A polar stretch action rotates,
moves, and stretches objects a specified angle and distance when the key
point on the associated polar parameter is changed through a grip or the
Properties palette
Rotate Action
Runs the BACTIONTOOL command, Rotate action option, which adds a
rotate action to the dynamic block definition when you associate the action
with a rotation parameter. A rotate action is similar to the ROTATE
command. In a dynamic block reference, a rotate action causes its associated
objects to rotate when the associated parameter is edited through a grip or
the Properties palette.
Flip Action
Runs the BACTIONTOOL command, Flip action option, which adds a flip
action to the dynamic block definition when you associate the action with
a flip parameter. With a flip action you can flip a dynamic block reference
about a specified axis called a reflection line.
Array Action
Runs the BACTIONTOOL command, Array action, which adds an array
action to the dynamic block definition when you associate the action with
a linear, polar, or XY parameter. An array action causes its associated objects
to copy and array in a rectangular pattern when the associated parameter
is edited through a grip or the Properties palette.
Lookup Action
Runs the BACTIONTOOL command, Lookup action option, which adds a
lookup action to the dynamic block definition. When you add a lookup
action to a dynamic block definition and associate it with a lookup
parameter, it creates a lookup table. You can use a lookup table to assign
custom properties and values to a dynamic block.
Parameter Sets Tab (Block Authoring Palettes Window)
Provides tools for adding a parameter and at least one action at the same time
to a dynamic block definition in the Block Editor. When you add a parameter
set to a dynamic block, the actions are automatically associated with the
parameter. After you add a parameter set to a dynamic block, you double-click
the yellow alert icon (or use the BACTIONSET command) and follow the
146 | Chapter 4