Autodesk AUTOCAD 2006, Справочник по командам, Страница: 1321 / 1490

Y
Sets the Y scale factor.
Specify Y scale factor: Enter a nonzero value
Specify insertion point:
Specify rotation angle <0>:
The rotation angle sets the angle of the WMF file.
Z
Sets the Z scale factor.
Specify Z scale factor: Enter a nonzero value
Specify insertion point:
Specify rotation angle <0>:
The rotation angle sets the angle of the WMF file.
Rotate
Sets the angle of insertion for the WMF file.
Specify rotation angle <0>:
Specify insertion point:
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter a value,
specify a point, enter an option, or press ENTER
X Scale Factor
Sets the X and Y scale factors.
Enter Y scale factor <use X scale factor>: Enter a value or press ENTER to use
the same scale factor
Corner
Defines the X and Y scales at the same time, using the insertion point and
another point as the corners of a box. The X and Y dimensions of the box
become the X and Y scale factors. The insertion point is the first corner.
Specify opposite corner: Specify a point
XYZ
Scales the metafile in all three dimensions.
Specify X scale factor or [Corner] <1>: Specify a nonzero value, enter c , or press
ENTER
If you enter c , you specify a corner point. The specified point and the
insertion point determine the X and Y scale factors for the block.
WBLOCK Command Line | 1297