Autodesk AUTOCAD 2006, Справочник по командам, Страница: 1114 / 1490

SHELL
Accesses operating system commands
Command line: shell
OS command: Enter an operating system command or press ENTER
With SHELL, you can execute operating system (OS) commands while
remaining in this program. When SHELL prompts you for an OS command,
you can enter most valid commands for your OS. When the command has
been executed, SHELL returns you to the Command prompt.
Pressing ENTER at the OS Command prompt displays the system prompt
with an extra close angle bracket (>). You can enter operating system
commands as if you were at the normal system prompt. Enter
exit to return
to the Command prompt.
WARNING Do not use the SHELL command to delete lock files (file name
extension .??k) or temporary files (file name extensions .ac$ or .$a). Do not use
SHELL to run chkdsk, reset the serial I/O ports, or run external programs that
require disk swapping while editing a drawing stored on a floppy disk. Load
Terminate-and-Stay-Resident programs into memory before starting this program.
SHOWMAT
Lists the material type and attachment method for a selected object
Command line: showmat
Select object: Use an object selection method to select a single object
Depending on the method used to attach a material to an object, SHOWMAT
reports with one of the following:
Material material name is explicitly attached to the object.
Material material name is attached by ACI to ACI color number.
Material material name is attached by layer to layer layer name.
Material *GLOBAL* is attached by default or by block.
Explicit attachment takes precedence over all other methods, and attachment
by ACI takes precedence over attachment by layer.
SIGVALIDATE
Displays information about the digital signature attached to a file
1090 | Chapter 20