Autodesk AUTOCAD 2006, Справочник по командам, Страница: 734 / 1490

At Least
Adjusts lines of text automatically based on the height of the largest
character in the line. When At Least is selected, lines of text with taller
characters have added space between lines.
Enter line spacing factor or distance <current>:
■
Spacing Factor: Sets the line spacing to a multiple of single-line spacing.
Single spacing is 1.66 times the height of the text characters. You enter
the spacing increment as a number followed by
x to indicate a multiple
of single spacing. For example, specify single spacing by entering 1x , or
specify double spacing by entering 2x .
■
Distance: Sets the line spacing to an absolute value measured in drawing
units. Valid values must be between 0.0833 (0.25x) and 1.3333 (4x).
Exactly
Forces the line spacing to be the same for all lines of text in the multiline
text object. Spacing is based on the text height of the object or text style.
Enter line spacing factor or distance <current>:
■
Spacing Factor: Sets the line spacing to a multiple of single-line spacing.
Single spacing is 1.66 times the height of the text characters. You can
enter a spacing factor as a number followed by
x to indicate a multiple
of single spacing. For example, specify single spacing by entering 1x , or
specify double spacing by entering 2x .
■
Distance: Sets the line spacing to an absolute value measured in drawing
units. Valid values must be between 0.0833 (0.25x) and 1.3333 (4x).
Rotation
Specifies the rotation angle of the text boundary.
Specify rotation angle <current>: Specify a point or enter a value
If you use the pointing device to specify a point, the rotation angle is
determined by the angle between the X axis and the line defined by the most
recently entered point (default 0,0,0) and the specified point.
The previous prompt is redisplayed until you specify the opposite corner of
the text boundary.
Style
Specifies the text style to use for multiline text.
710 | Chapter 14