Autodesk AUTOCAD 2006, Справочник по командам, Страница: 541 / 1490

Enter hatching style [Ignore/Outer/Normal] <current>:
Ignore
Ignores all internal objects and hatches or fills through them. You can also
set the Ignore style by adding
,I to the pattern name in the HPNAME system
variable.
Outer
Hatches or fills inward from the outer boundary. HATCH turns hatching
or filling off if it encounters an internal island. This option hatches or fills
only the outermost level of the structure and leaves the internal structure
blank. You can also set the Outer style by adding
,O to the pattern name
in the HPNAME system variable.
Normal
Hatches or fills inward from the outer boundary. If HATCH encounters an
internal island, it turns off hatching or filling until it encounters another
island within the island. You can also set the Normal style by adding
,N to
the pattern name in the HPNAME system variable.
Properties
Specifies new hatch properties for the selected hatch. For an explanation of
setting pattern properties on the command line, see HATCH.
Draw Order
Sets the draw order of the hatch. The following prompt is displayed:
Enter draw order [do Not change/send to Back/bring to Front/send beHind
boundary/bring in front of bounDary] <do Not change>: Enter an option
Send to Back
Sends the hatch in back of all other objects
Bring to Front
Brings the hatch in front of all other objects
Send Behind Boundary
Sends the hatch behind the hatch boundary
Bring in Front of Boundary
Brings the hatch in front of the hatch boundary
HATCHEDIT Command Line | 517