manualshive.com logo in svg

Autodesk AUTOCAD 2006, Справочник по командам, Страница: 901 / 1490

Поделиться
Скачать
Autodesk AUTOCAD 2006 Скачать руководство пользователя страница 901

Device

For each selection you make under Printer Name, the corresponding device
driver name is displayed in this column, as follows:

■

For a selected plotter or printer, this column displays the device driver
name stored in the plotter or printer’s PC3 file.

■

For a selected PC3 file, this column displays the device driver name stored
in the PC3 file.

■

For a selection of None, this column displays no device name. No device
will be substituted for the missing printer specified in the PC3 file.

Device Needed

Displays the device specified in the PC3 file that is configured for the current
layout.

Printer Name

Lists the available plotters, printers, and PC3 files. Select a plotter, printer,
or PC3 file to be substituted for the missing printer specified in your PC3
file. Select None if you don’t want to make any substitution.

If you select None, the other settings for the current layout remain
unchanged. If you select a plotter or printer that uses a different driver than
the one specified in the original PC3 file, the following configuration
information may change when the PC3 file is saved:

■

Plot quality

■

Color depth

■

Resolution

■

Media source

■

Media destination

■

Media finishing options (such as folding or binding)

■

Any custom settings of the previous device or driver

If the plotter or printer you select can’t support the paper size specified in
the layout, the default paper size is used. A warning is displayed that allows
you to cancel this operation and return to the Plot or Page Setup dialog box
with the None device selected.

Update PC3 File with New Printer Dialog Box | 877

Содержание AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов