Autodesk AUTOCAD 2006, Справочник по командам, Страница: 194 / 1490

Startpoint
Specifies that the start point of the parameter remains fixed when the
endpoint of the parameter is edited in the block reference.
Midpoint
Specifies a midpoint base location for the parameter. This midpoint is
indicated by an X in the block definition. When you edit the linear
parameter in the block reference, the midpoint of the parameter remains
fixed, and the start point and endpoint of the parameter move
simultaneously equal distances from the midpoint. For example, if you
move the grip on the endpoint two units away from the midpoint, the start
point simultaneously moves two units in the opposite direction.
Palette
Specifies whether or not the parameter label is displayed in the Properties
palette when the block reference is selected in a drawing.
Display property in Properties palette? [Yes/No] <Yes>: Enter n or press ENTER
Value Set
Specifies a value set for the parameter. Limits the available values for the
parameter in a block reference to the values specified in the set.
Enter distance value set type [None/List/Increment] <None>: Specify a value set
type or press ENTER to specify no value set type
List
Specifies a list of available values for the parameter in a block reference.
Enter list of distance values (separated by commas):
Increment
Specifies a value increment and minimum and maximum values for the
parameter in the block reference.
Enter distance increment:
Enter minimum distance:
Enter maximum distance:
Polar
Adds a polar parameter to the current dynamic block definition. Defines
custom distance and angle properties for the block reference. You associate a
move, scale, stretch, polar stretch, or array action with a polar parameter.
170 | Chapter 4