Autodesk AUTOCAD 2006, Справочник по командам, Страница: 1341 / 1490

Layer
Sets the layer of the component objects after you explode them. The default
option is to inherit the current layer rather than the layer of the exploded
object.
Enter new layer name for exploded objects < current >: Enter an existing layer
name or press ENTER
LType
Sets the linetype of the component objects after you explode them.
Enter new linetype name for exploded objects <BYLAYER>: Enter a linetype name,
or press ENTER
You can enter the name of any linetype that is loaded in the drawing.
Entering
bylayer causes the component objects to inherit the linetype of
the exploded object’s layer. Entering byblock causes the component objects
to inherit the linetype of the exploded object.
Inherit from Parent Block
Sets the color, linetype, lineweight, and layer of the component objects to
that of the exploded object if the component objects’ color, linetype, and
lineweight are BYBLOCK and the objects are drawn on layer 0.
Explode
Breaks a compound object into its component objects exactly as the
EXPLODE command does.
Globally
Applies changes to all the selected objects.
Enter an option [All/Color/LAyer/LType/Inherit from parent block/Explode]
<Explode>: Enter an option or press ENTER
The descriptions of the All, Color, Layer, LType, Inherit from Parent Block,
and Explode options match the descriptions of the corresponding options
under Individually.
XREF
Controls external references to drawing files
Reference toolbar:
XBIND Command Line | 1317