Autodesk AUTOCAD 2006, Справочник по командам, Страница: 139 / 1490

If you selected a point parameter, the following prompts are displayed:
Specify selection set for action
Select objects: Select objects for the action’s selection set
Specify action location or [Multiplier/Offset]: Specify a location in the block definition
for the action
If you selected a linear or polar parameter, the following prompts are displayed:
Specify parameter point to associate with action or enter [sTart point/Second
point] <Second>: Specify a parameter point to associate with the action or press
ENTER to associate the action with the second point
Specify selection set for action
Select objects: Select objects for the action’s selection set
Specify action location or [Multiplier/Offset]: Specify a location in the block definition
for the action
If you selected an XY parameter, the following prompts are displayed:
Specify parameter point to associate with action or enter [sTart point/Second
point] <Second>: Specify a parameter point to associate with the action or press
ENTER to associate the action with the second point
Specify selection set for action
Select objects: Select objects for the action’s selection set
Specify action location or [Multiplier/Offset/XY]: Specify a location in the block
definition for the action
Multiplier
Changes the associated parameter value by a specified factor when the
action is triggered.
Enter distance multiplier <1.0000>: Enter a value or press ENTER to select 1.0000
Offset
Increases or decreases by a specified number the angle of the associated
parameter when the action is triggered.
Enter angle offset <0>: Enter a value or press ENTER to select 0
XY
Specifies whether the distance that is applied to the action is the XY
parameter’s X distance, Y distance, or XY distance from the parameter’s
base point.
Enter XY distance type [X/Y/XY] <XY>: Enter the distance type or press ENTER to
select XY
Adjust Background Bitmap Placement Dialog Box | 115