Autodesk AUTOCAD 2006, Справочник по командам, Страница: 1138 / 1490

Taper
Tapers faces with an angle. The rotation of the taper angle is determined by
the selection sequence of the base point and second point along the selected
vector.
Select faces or [Undo/Remove]: Select one or more faces or enter an option
The descriptions of the Undo, Remove, Add, and All options match the
descriptions of the corresponding options under Extrude. After you select faces
or enter an option, the following prompt is displayed:
Select faces or [Undo/Remove/ALL]: Select one or more faces (1) , enter an option,
or press ENTER
Specify the base point: Specify a base point (2)
Specify another point along the axis of tapering: Specify a point (3)
Specify the taper angle: Specify an angle between –90 and +90 degrees
face selected base point and second
point selected face tapered 10 deg
1
2
3
Tapering the selected face with a positive angle tapers the face in, and a
negative angle tapers the face out. The default angle, 0, extrudes the face
perpendicular to its plane. All selected faces in the selection set are tapered to
the same value.
Delete
Deletes or removes faces, including fillets and chamfers.
Select faces or [Undo/Remove]: Select one or more faces
The descriptions of the Undo, Remove, Add, and All options match the
descriptions of the corresponding options under Extrude. After you select faces
or enter an option, the following prompt is displayed:
Select faces or [Undo/Remove/ALL]: Select one or more faces (1), enter an option,
or press ENTER
Solid validation started.
Solid validation completed.
1114 | Chapter 20