Autodesk AUTOCAD 2006, Справочник по командам, Страница: 566 / 1490

Y
Sets the Y coordinate value.
Z
Sets the Z coordinate value.
Path Type
Specifies one of three types of folder path information to save with an attached
image: an absolute path, a relative path, and no path. For a complete
description of each option, see “Set Paths to Externally Referenced Drawings”
in the User’s Guide.
Insertion Point
Specifies the insertion point for the selected image. Specify On-Screen is the
default. The default insertion point is 0,0.
Scale
Specifies the scale factor of the selected image. Specify On-Screen directs input
to the command line or the pointing device. If Specify On-Screen is cleared,
enter a value for the scale factor. The default scale factor is 1.
If INSUNITS is set to “unitless” or if the image does not contain resolution
information, the scale factor becomes the image width in AutoCAD units. If
INSUNITS has a value such as millimeters, centimeters, inches, or feet, and
the image has resolution information, the scale factor is applied after the true
width of the image in AutoCAD units is determined.
Rotation
Specifies the rotation angle of the selected image. If Specify On-Screen is
selected, you may wait until you exit the dialog box to rotate the object with
your pointing device or enter a rotation angle value on the command line. If
Specify On-Screen is cleared, enter the rotation angle value in the dialog box.
The default rotation angle is 0.
Details
Displays the Image Information section. You can view width and height in
pixels, the resolution, and the size in units (such as millimeters, centimeters,
meters, kilometers, inches, feet, yards, miles, unitless, and many others). The
default value for unitless images is unitless. The image size is automatically
converted to AutoCAD units and is displayed at the default width and height.
542 | Chapter 11