Autodesk AUTOCAD 2006, Справочник по командам, Страница: 127 / 1490

Red, Green, Blue: Enter three integer values from 0 to 255 separated by commas
to specify a true color
Color Book
Specifies a color from a loaded color book to be used for the selected object.
Enter Color Book name: Enter the name of a color book that has been installed,
such as PANTONE
®
If you enter a color book name, you are prompted to enter the color name
in the color book.
Enter color name: Enter the name of a color included in the selected color book,
such as PANTONE
®
573
Next
Moves to the next attribute in the selection set. If there are no more attributes,
ATTEDIT ends.
No
Edits more than one attribute at a time. Global editing applies to both visible
and invisible attributes.
Editing attributes globally limits you to replacing a single text string with
another text string. If you edit attributes one at a time, you can edit any or
all of the attributes.
Performing global editing of attribute values.
Edit only attributes visible on screen? [Yes/No] <Y>: Enter y or press ENTER to
edit only visible attributes, or enter n to edit all attributes
Yes
Edits only visible attributes.
Enter block name specification <*>: Press ENTER , or specify a block name or a
partial block name with wild-card characters (? or *) to narrow the selection to
specific blocks
Enter attribute tag specification <*>: Press ENTER , or specify a tag or a partial
tag with wild-card characters (? or *) to narrow the selection to specific attributes
Enter attribute value specification <*>: Press ENTER , or specify a value or a
partial value with wild-card characters (? or *) to narrow the selection to specific
attribute values
Attribute values are case sensitive. To select empty (null) attributes, which
normally are not visible and cannot be selected, enter a backslash (\).
Select Attributes: Select only attributes parallel to the current UCS
Select the attribute you want to change.
ATTEDIT Command Line | 103