62
When all settings for the surround setup have been made, press the
▼
/
▲
Navigation Button
[oval 16]
so that the cursor is next to
BACK TO MAIN ROOM
, and press the
Set Button [oval 18]
to return to the
MAIN ROOM SETUP
.
DTS
With DTS selected in
SOURCES 1/AUDIO MODE
, the selection choices made with the
◄
/
►
Navigation Button [oval 16]
on the remote are determined by a combination of the type of
program material in use and whether the 5.1- or 7.1- channel configuration is selected in System
Configuration.
When a DTS digitally encoded source is playing, the choice of modes for 7.1 systems will vary
according to the program source (DTS 5.1, DTS-ES Matrix or DTS-ES Discrete). Press the
◄
/
►
Navigation Button [oval 16]
to scroll through the choices available for your system and the
program in use. The DTS Neo:6 Music mode is available with analog and PCM digital stereo
sources and the DTS Neo:6 Cinema mode may be used with matrix surround-encoded sources
for an enhanced 5.1-channel sound field.
When the 5.1 configuration is in use, the AVR will automatically select the 5.1 version of DTS
processing. When 7.1 mode is selected, the DTS-ES Discrete mode will automatically be
activated for DTS sources with the ES Discrete “flag.” When a non-ES DTS disc is in use, you
may select the DTS-ES Matrix mode to create a full 7.1 surround mode. See sections:
Main
Room Operation/Surround Mode Selection
and
Digital Audio Playback
for an explanation of
the DTS modes.
When an analog or two-channel PCM source is playing, the DTS Neo:6 modes are available,
which creates a three, five or six-channel presentation of the sound. The exact modes available
will depend on the number of speaker positions established in the
SPEAKER CONFIGURATION
menu. (See section:
AVR21EN Configuration/Speaker Setup
to configure the system for the
number and type of speakers in your system.)
Logic 7
With
LOGIC 7
selected in
SOURCES 1/AUDIO MODE
, the choices available are determined by
whether the 5.1 or 7.1-channel configuration is in use. In either case, the selection of a Logic 7
mode enables Audioaccess’ exclusive Logic 7 processing to create multichannel surround from
two-channel stereo or matrix-encoded programming such as VHS cassettes or television
broadcasts produced with Dolby Surround.
With 5.1 configurations, you may select the Logic 7/5.1 Music, Cinema or Enhance modes. They
work best with surround-encoded programs or two-channel programming of any type. For 6.1/7.1
configurations, the Music and Cinema modes may be selected. The Logic 7 modes are not
available when either Dolby Digital or DTS Digital soundtracks are in use. See sections:
Main
Room Operation/Surround Mode Selection
and
Digital Audio Playback
for an explanation of
the Logic 7 modes.
DSP
In the
DSP (SURR)
menu, the choices made with the
◄
/
►
Navigation Button [oval 16]
select
one of the DSP surround modes designed for use with two channel stereo programs to create a
variety of sound field presentations. The Hall and Theater modes are designed for multichannel
installations. See section:
Main Room Operation/Surround Mode Selection
and
Digital Audio
Playback
for an explanation of the DSP surround modes.
Stereo
In the
STEREO
menu, the choices made with the
◄
/
►
Navigation Buttons [oval 16]
include a
traditional two-channel stereo presentation that uses only the left and right front speakers. When
SURROUND OFF
is selected, the unit is in a full bypass mode with no bass management or other
processing applied to the signal as it is routed directly from the input to the volume stage. When
Содержание AVR21EN
