Audioaccess AVR21EN, Руководство по установке

Страница: 35 / 222

35
6. TV Mode Select: Press this button to switch the remote keys to directly control the local TV
or video display.
7.
6CH/8CH Input Select: Press this button to select the device connected to the 8-Channel
Direct Inputs [oval 7]. (See section: Main Room Installation & Setup/8 Channel DVD
Audio for more information.)
8. Faroudja Processor On/Off: Press this button to activate the Faroudja DCDi Processor.
Press again to de-activate the processor. FAROUDJA ON/OFF will appear in the AVR Upper
Display Line [square 33].
9.
Test Tone Button: Press this button to stop the sequence used to calibrate the AVR21EN’s
output levels during EzSet/EQ. (See sections: AVR21EN Configuration/EzSet/EQ and
Output Level Adjustment for more information on calibrating the AVR21EN speaker level
audio output.)
10.
Disc Direct (Unmarked Round Blue Button): Press this button when a disc changer is in
use to directly enter a disc number. After pressing this button, press the appropriate
Alphanumeric Keys [oval 46] to select a disc.
11.
Audio Input Selector: After pressing the AVR button, press this button to select one of the
digital audio inputs [squares 19, 24] for use with its source, or to select the analog audio
input for that source using the ▼ / ▲ Navigation Button [oval 16] . It is possible to reassign a
digital audio input to sources with selectable audio inputs, even if the audio is from a different
source than the one selected for play. See section:
AVR21EN Configuration/Source Audio
Input for more information on using digital inputs.
12. Direct/List Select Button: Press this button when the tuner is in use to directly enter a
station’s frequency, or when a CD is in use to directly enter a track number. After pressing
this button, press the appropriate
Alphanumeric Keys [oval 46] to select a station or track.
This button also activates the List function for TiVo players. See your TiVo Owner’s Manual
for more information on the List function.
13.
Surround Mode Select Button: After pressing the AVR Button, press this button to select
one of the DSP audio surround modes, such as: Dolby, Logic 7, or NEO:6 or DSP. Each
press of the button selects another mode. Pressing the
▼ / ▲ Navigation Button [oval 16]
once one of the Modes has been selected allows choice of various options within the different
surround modes. See sections:
AVR21EN Configuration/Audio Mode and Main Room
Operation/Surround Mode Selection for descriptions of the different surround modes and
options.
14.
Angle/Tuning Mode Button: When the DVD mode is active, press this button to select an
alternate camera angle, if available on the current DVD. When the tuner is in use, press this
button to change the tuner scan mode between manual and automatic. When the button is
pressed so that
AUTO/STEREO appears in the AVR Upper Display Line [square 33] , only
stations with acceptable signal quality will be tuned when scanning, and the tuner will play
FM stations in stereo, when available. In the Auto mode, when the
Tuning Up/Down
Buttons [ovals 21, 40] are pressed and held, the unit will automatically search for the next
available station with good signal strength. When the Tuning Mode Button [oval 14] is
pressed so that MANUAL/MONO appears in the AVR Upper Display Line [square 33] ,
pressing and holding the Tuning Up/Down Buttons [ovals 21, 40] will cause the tuner to
scan up or down through the frequencies and stop when the button is released, even if that
frequency does not provide an acceptable signal. In the
MANUAL/MONO mode, each tap of the
Tuning Up/Down Buttons [ovals 21, 40] will cause the tuner to step through the
frequencies in single-step increments. When the FM band is in use, pressing the button so
that the
MANUAL/MONO mode is activated will enable you to tune stations with weak signals