194
Buttons [oval 16]
to review Setup Pages and Settings. Make changes as necessary. Refer to
previous instructions. Confirm system functions from zones using keypads.
To exit menu and return to system mode, press the
Exit Button [oval 17]
.
Keypad Setup By Name
Keypad Setup By Name, allows zone configuration when searching by zone name. The Keypad
Number is assigned by the system given which
KP 1-20 Terminal [pentagon 5]
a keypad is
connected to on an AVH21. Zone Name can only be edited in Keypad Setup by Number, above.
To make changes to zone settings in
KEYPAD SETUP BY NAME
:
1. In the Main Room, turn on the AVR21EN and Main Room video display.
2. Press
the
AVR Button [oval 5]
on the AVR21ENR1 remote.
3. Press
the
MENU Button [oval 44]
on the remote. The
MAIN MENU
will appear.
4. Press
the
▼
Navigation Button [oval 16]
until the cursor is next to:
ZONE SETUP
.
5. Press
the
Set Button [oval 18]
.
ZONE SETUP PAGE 1
will appear.
6. Make
changes
in
ZONE SETUP PAGE 1
as described in Zone Setup.
7. To
enter
ZONE SETUP BY NAME
, use the
▼
/
▲
Navigation Buttons [oval 16]
to position the
cursor next to
GO TO ZONE PAGE 2
. Press the
Set Button [oval 18]
.
8. Use
the
▼
/
▲
Navigation Buttons [oval 16]
to position the cursor next to
ZONE SETUP BY
NAME
. Press the
Set Button [oval 18]
.
9. Use
the
◄
/
►
Navigation Buttons [oval 16]
to select zone to be configured, by name.
10. Follow the instructions in Section: Keypad Setup by Number.
Diagnostics
The Diagnostic screens provide real-time system information regarding which W.H.E.N. System
components are connected and the firmware versions in the components found.
To open the
DIAGNOSTICS
Menu:
1. In the Main Room, turn on the AVR21EN and main room video display.
2. Press
the
AVR Button [oval 5]
on the AVR21ENR1 remote.
3. Press
the
MENU Button [oval 44]
on the remote. The
MAIN MENU
will appear.
4. Press
the
▼
Navigation Button [oval 16]
until the cursor is next to:
DIAGNOSTICS
.
5. Press
the
Set Button [oval 18]
. The
DIAGNOSTICS
screen will appear. (
Figure 119
)
Figure 119 Diagnostics Main Menu
Settings
These screens show that the main system components, the AVR21EN and AVH21 A/V Hubs are
connected, powered up and functional. The values associated with each line item refer to
software and firmware versions and are primarily intended for use by service personnel. In some
cases if a system is not performing properly, Audioaccess Tech Support may request some of
this information. These values are not accessible or configurable from this screen.
Содержание AVR21EN
