Audioaccess AVR21EN, Руководство по установке

Страница: 178 / 222

178
This section names the Wake-Up Groups. Building the groups will be done in a later section. To
name Wake-Up Groups:
1. From
ZONE SETUP PAGE 1 , with the cursor next to NAME WAKE-UP GROUPS , press the
Set Button [oval 18] . The NAME WAKE-UP GROUPS screen will appear. ( Figure 105 )
2. Press the ▼ / ▲ Navigation Button [oval 16] to position the cursor next to
NAME
. Press the
Set Button . A white rectangle will flash to the right of
NAME:
indicating that the remote can
be used to enter the letters for the group name.
3. Using either the ▼ / ▲ Navigation Button [oval 16] or the Alphanumeric Buttons [oval 46] ,
enter the first letter for the group name. (i.e. MASTER SUITE). When the first letter appears
on screen, press the
► Navigation Button [oval 16] to move the cursor to the next letter
position.
4. Repeat steps 2-3 above until the Wake-Up Group Name has been spelled out. A Group
Name can have up to 12 letters. Press the Set Button [oval 18] . This will store the name and
return the cursor to the arrow next to
NAME
.
5. To name additional groups, press the ▼ / ▲ Navigation Button [oval 16] to position the
cursor next to
GROUP
. Press the ◄ / ► Navigation Button [oval 16] to select another group.
6. Repeat steps 2-4 until all desired Wake-up Groups have been named. Up to 8 Wake-Up
Groups can be created.
To exit setup, press the Exit Button [oval 17] . To continue Zone Setup, position the cursor next
to
BACK TO ZONE SETUP
and press the Set Button [oval 18] .
ZONE SETUP PAGE 1
will
appear.
Figure 106 Name Sleep Groups Screen
Name Sleep Groups
Sleep Groups set scheduled times to shut down specific zones or groups of zones. This is a
convenient feature for turning off the Patio Zone at a pre-determined time as to not disturb the
neighbors or for managing systems if zones are turned on and then left alone. NOTE: It is not
necessary to set a Sleep Group for a Wake-Up Group. Wake-Up Groups have a preset duration
for activity before they shut off automatically.
This section names the Sleep Groups. Building the groups will be done in a later section. To
name Sleep Groups:
1. From
ZONE SETUP PAGE 1
, with the cursor next to
NAME SLEEP GROUPS
, press the Set
Button [oval 18] . The
NAME SLEEP GROUPS
screen will appear. ( Figure 106 )
2. Press the ▼ / ▲ Navigation Button [oval 16] to position the cursor next to NAME . Press the
Set Button [oval 18] . A white rectangle will flash to the right of NAME: indicating that the
remote can be used to enter the letters for the group name.
3. Using either the ▼ / ▲ Navigation Button [oval 16] or the Alphanumeric Buttons [oval 46] ,
enter the first letter for the group name. (i.e. PATIO). When the first letter appears on screen,
press the
► Navigation Button [oval 16] to move the cursor to the next letter position.