86
Navigation Button [oval 16]
to test all selected device type commands until the unit turns off.
When the unit turns off, press the
▼
Navigation Button [oval 16]
to move the cursor next to:
YES
. Press the
Set Button [oval 18]
to ‘save’ the code group.
Press the
Exit Button [oval 17]
to exit Menu. Press the appropriate
Input Selector [oval 4]
on
the AVR21ENR1 remote to select the source and then press various control buttons, (Play, Stop,
Track, numeric functions, etc) to confirm IR codes. If some commands are missing (not included
in the library) or if no proper code group was found, they can be added individually by using the
LEARN CODE
option in
CONTROL SETUP
.
If the appropriate code group has been configured, return to the
REMOTE CONTROL SETUP 1
screen to configure the next source’s IR codes. Repeat until all sources are setup for IR control.
LEARN CODE
If specific commands are missing from Program Setup (not included in the library), if no proper
code group was found, or if a special command is required, they can be added individually by
using the
LEARN CODE
option in
CONTROL SETUP
.
To open the
LEARN CODE
screen, press the
Menu Button [oval 44]
on the remote to bring the
MAIN MENU
to the screen. Press the
▼
/
▲
Navigation Button [oval 16]
so that the cursor is
pointed to the
REMOTE CONTROL SETUP
line. Press the
Set Button [oval 18]
. The
REMOTE
CNTL SETUP 1
screen will appear.
Press the
▼
/
▲
Navigation Button [oval 16]
so that the cursor is pointed to the source to be
configured. (For example Disc 1 will be used.) Press the
Set Button [oval 18]
. The
DISC 1
CNTL SETUP
screen will appear. Press the
▼
/
▲
Navigation Button [oval 16]
so that the cursor
is pointed to the
LEARN CODE
line. Press the
Set Button [oval 18]
. The
DISC 1 CODE LEARN
screen will appear. (
Figure 35
)
Figure 35 Source Code Learn Screen
With the cursor positioned next to
USING THE
◄
►
KEYS
line, press the
Set Button [oval 18]
.
The message:
USING THE
◄
/
►
KEYS SELECT FUNCTION TO BE PROG
will start to flash,
indicating a function can be selected for learning. Press
◄
/
►
Navigation Button [oval 16]
to
scroll through the AVR21ENR1 remote buttons available for programming. When the desired
function appears, press the
▼
Navigation Button [oval 16]
to position the cursor next to
POINT
ORIGINAL REM TO AVR DISPLAY PRESS KEY
. Press the
Set Button [oval 18]
. The
POINT
ORIGINAL…
message will start to flash. Point the original remote toward the
IR Sensor [square
31]
in the
Information Display [square 25]
on the AVR front panel and press the button with the
original code until the message stops flashing and
CODE LEARNED
appears on screen.
The cursor will automatically return to the
USING THE
◄
►
KEYS
line. Repeat steps above
until all individual codes have been learned.
Содержание AVR21EN
