66
Figure 22 Video Settings 3 Screen
Brightness:
The changes to this setting are similar to the Brightness control on your display,
changing the video level. If circumstances are such that a source has a low signal and appears
dark you may wish to change this setting, but be careful not to increase it to the point where the
video display is over-driven into clipping or blooming.
Contrast:
The changes to this setting are similar to the Contrast control on your display,
changing the black level to compensate for poor contrast.
Saturation:
The changes to this setting are similar to the Color control on your display, and may
be used as needed to compensate for over or under color saturation.
When all settings for that require adjustment have been made, use the
◄
/
►
Navigation Buttons
[oval 16]
to move the on-screen
cursor next to
GO TO VIDEO SETTINGS 1
or
GO TO VIDEO
SETTINGS 2
to confirm or change settings and then press the
Set Button [oval 18]
, or to return
to the sources settings page, move the on-screen
cursor next to the
BACK TO SOURCES
line in
and press the
Set Button [oval 18].
To exit setup, press the
Exit Button [oval 17]
on the
remote.
EzSet/EQ
The AVR21EN is one of the first receivers in its class to offer automated speaker setup and
system calibration. This process greatly simplifies the installation of your new receiver by using a
series of test signals and the power of an advanced digital signal processing system to eliminate
the need for manual adjustment of speaker “size”, crossover, delay and output level settings,
while adding the power of a multi band parametric equalizer to smooth out any peculiarities in
frequency response that may result from the characteristics of the listening room. With EzSet/EQ
your new receiver even alerts you to errors in speaker connections that prevent a speaker from
functioning.
EzSet/EQ enables you to calibrate your system in a fraction of the time it would take to enter the
settings manually, and with results that rival those achieved with expensive test equipment and
time-consuming procedures. The end result is a system calibration profile that enables your new
receiver to deliver the best possible sound, no matter what type of speakers you have or what the
dimensions of your listening room are. We recommend that you take advantage of the precision
of EzSet/EQ to calibrate your system, but if desired you may also make any of the configuration
settings manually, or trim the settings provided by EzSet/EQ by following the instructions in:
Main
Room Operation/Output Level Trim Adjustment
.
Step 1:
EzSet/EQ requires that your listening room have as little background noise as possible to
avoid interfering with the measurement of tones produced by your AVR during the setup
procedure. Turn off all loud fans, air conditioners and other equipment, and try to avoid making
any noise during the process.
Содержание AVR21EN
