Audioaccess AVR21EN, Руководство по установке

Страница: 36 / 222

36
by changing to monaural reception. See section: Main Room Operation/Tuner Operation
for more information on tuner operation.
15.
Guide/Level Button: This button is used to start the process of manually setting the
AVR21EN’s speaker output levels. While a reference source is playing, press this button, and
then press the
▼ / ▲ Navigation Button [oval 16] until the channel to adjust appears. Press
the Set Button [oval 18] to select that channel, and then use the ▼ / ▲ Navigation Button
[oval 16] again to adjust the level setting. Press the Set Button [oval 18] to set the level.
Press the ▼ / ▲ Navigation Button [oval 16] again until the next channel to adjust appears. If
no further adjustments are required the Level Adjust Mode will timeout automatically as set in
OSD duration. See sections:
AVR21EN Configuration/EzSet/EQ and Main Room
Operation/Output Level Trim Adjustment for more information.
16.
Navigation Disc: This single disc-like button is used to navigate the on-screen configuration
menus, to scroll through options lists and to select various settings such as delay, speaker
configurations, surround modes, digital inputs, etc. To use the button, simply press it left, right,
up or down in the direction indicated by the
◄ / ► / ▼ / ▲ icons printed on the disc.
17.
Exit/Cancel Button: When programming the remote, press this button to cancel the current
function and return to the previous remote function.
18.
Set Button: This button is used to enter settings into the AVR21EN’s memory, or to confirm
a selection while setting delay distances, speaker configuration and output level adjustments.
It is used as the Enter or OK button for most other devices.
19.
Preset/Page Down/Reverse Skip: This multipurpose button has a different function
depending on the source in use. When used with the tuner, this button scrolls through the
pre-programmed station presets. When used with optical sources, such as an external
DVD/CD player, press this button once to return to the beginning of the current track, and
again quickly, to go to the beginning of the previous track. The Page Down function is used
with cable and satellite television to page quickly through on-screen menus.
20. Volume Up/Down Control: To raise the volume, press towards the top of the disc, where it
is marked ▲ Vol , and to lower the volume, press towards the bottom of the disc, where it is
marked ▼ Vol . The left and right arrows on this disc have different functions, depending on
the source in use. See Channel/Slow Play Up/Down Control [oval 41] below for more
information.
21.
Tune Down/Reverse Search Button: This button has different functions depending on
whether the tuner or another source is in use. Press this button when the tuner is in use to
change the station to one with a lower frequency. When the tuner is in
MANUAL/MONO mode,
each tap of this button will decrease the frequency by one increment. When the tuner
receives a strong enough signal for adequate reception,
MANUAL TUNED will appear in the
AVR Lower Display Line [square 34] . When the tuner is in the AUTO/STEREO mode, press
the button to cause the tuner to scan for the next lower station with acceptable signal strength
and stop. The
Lower Display Line [square 34] will indicate AUTO TUNED . When an FM
Stereo station is tuned, the display will read AUTO ST TUNED . When the tuner is in
Manual/Mono mode, you may press and hold this button to scan downward through the
frequencies, and the tuner will stop immediately when you release this button, even if no
acceptable signal is detected at that frequency. See section:
Main Room Operation/Tuner
Operation for more information on using the tuner. When an optical player source, such as a
DVD changer, is in use, press this button to search quickly in reverse through the current
track or chapter. Depending on the type of disc used in the DVD changer, each additional
press will cycle through the available scan speeds.