57
To use the full-OSD menu system, press the
AVR Button [oval 5]
followed by the
MENU Button
[oval 44]
. When the menu is on the screen, press the
▼
/
▲
Navigation Button [oval 16]
until
the on-screen cursor is next to the item you wish to adjust, and then press the
Set Button [oval
18]
to adjust that item. The menus will remain on the screen for 20 seconds, and then they will
“time-out” and disappear from the screen. The time-out may be increased to as much as 180
seconds by going to the
ADVANCED
menu, and changing the item titled
MAIN MENU TIMEOUT
.
When the full-OSD system is in use, the menu selections are not shown in the AVR
Upper or
Lower Display Lines [squares 33, 34]
. When the full-OSD menu system is used,
MENU
will
appear in the
Upper Display Line [square 33]
to remind you that a video display must be used.
When the semi-OSD system is used in conjunction with the discrete configuration buttons, the
onscreen display will show a single line of text with the current menu selection. That selection will
also be shown in the
Upper or Lower Display Lines [squares 33, 34]
, depending on which
parameter is being adjusted.
Setting the System Configuration Memory
The AVR21EN features an advanced memory system that enables you to establish audio and
video parameters for each input source. This flexibility enables you to customize the way in which
you listen to each source and have the AVR21EN memorize those settings. This means, for
example, that you may set different speaker configurations with the resultant changes to the bass
management system. Thanks to the use of exclusive Audioaccess circuitry and software along
with DCDi by Faroudja technology, you may also customize the video settings for each input
source to display consistent, high-quality video images when the AVR21EN is used in conjunction
with a digital or high definition display. Once these settings are made, they will automatically be
recalled whenever you select an input.
The factory default settings for audio inputs vary by source and are detailed in the
Appendix
.
They have been setup for typical use based upon their intended source. (i.e. digital in for Disc,
analog in for Cable, etc.) The default for all speaker settings have front set to “Small” with all
others set to NONE, so you can configure the speakers to the specific use of this system. Logic 7
Music is the default surround mode for all sources, with Dolby Digital or DTS being selected
automatically when an appropriate digital source is in use and a digital bitstream is detected.
The factory default settings for video have all inputs configured for AUTO. This means the AVR
will automatically select the highest quality signal available (Component, S-Video then
Composite) when a given source is selected. The default video settings are listed in the
Appendix
. Note, however, that most of the video default settings are only applicable when a
component connection to a digital ready or HDTV monitor is in use. Both the video and audio
settings for all inputs may be changed as shown in the following pages.
Before using the unit, you may want to change the settings for some inputs so that they are
properly configured to reflect the use of digital or analog inputs, the type of speakers installed and
the surround mode specifics of your home theater system. Remember that since the AVR21EN
memorizes the settings for each input individually, you will need to make these adjustments for
each input used. However, once they are made, further adjustment is only required when system
components are changed. Also note that speaker configuration
(MAIN ROOM SETUP/SYSTEM
CONFIGURATION)
is global to the system. The AVR will not change speaker configuration by
source. It can change Surround Modes by source if desired.
To make this process as quick and as easy as possible, we suggest that you use the full-OSD
system with the on-screen menus, and step through each input. Once you have completed the
settings for the first input, many settings may be duplicated for the remaining inputs. It is also a
good idea to set the configuration data in the order these items are listed in the
MASTER MENU
,
as some settings require a specific entry in a prior menu item.
Содержание AVR21EN
