Audioaccess AVR21EN, Руководство по установке

Страница: 220 / 222

220
TROUBLESHOOTING
MULTIROOM TROUBLESHOOTING GUIDE
SYMPTOM CAUSE SOLUTION
POWER
AVR21EN does not
power up
WPS21 does not
power up
AVH21 does not
power up
Keypads do not
power up
•
No AC Power
•
No AC power
•
No AC power
•
No DC power
•
Make certain that the AC power cord is
plugged into a live outlet
•
Check to see whether the outlet is switch-
controlled
•
Make certain that the AC power cord is
plugged into a live outlet
•
Check to see whether the outlet is switch-
controlled
•
Check connections to WPS21
•
Check connections to WPS21
CONTROL
Keypad does not
control AVR21EN
Keypad does not
control sources
KP21R Remote
does not control
sources
•
No/wrong connection to
AVH21 Hub
•
No/wrong connection of IR
emitters
•
No/wrong IR codes
configured in Remote Control
Setup
•
Keypad connection
•
IR sensor
•
Check keypad connection to proper AVH21
‘KP’ terminal
•
Confirm AVH21 connection to AVR21EN.
•
Confirm keypad DIP switch setting
•
Confirm IR emitters are connected to proper
IR control out jacks
•
Confirm placement of emitters over IR eye
on source components
•
Check for proper source IR code
configuration in AVR21EN Remote Control
Setup
•
Check keypad connections as described
above.
•
Check external IR sensor connections to
keypad (if used).
•
Be sure IR sensor is not flooded by sunlight
or other light source.
•
Confirm source IR code configuration in
AVR21EN Remote Control Setup
•
Confirm remote code programming
AUDIO
No audio from
source
No audio in zone
No audio in
expanded zones •
Source connection
•
Source power
•
Source configuration
•
Zone settings
•
Keypad connection
•
Speaker connections
•
AVH21 Hub connections
•
Confirm source is connected to proper input
on AVR21EN.
•
Confirm source power is in sync with system
•
Check input configuration in Sources Setup
•
Check zone power/volume/mute
•
Check keypad connection to AVH21. (Audio
is distributed via CAT5Ee to zones)
•
Check speaker connections to keypad.
•
Confirm CAT5Ee connections between