AMS Neve AudioFile SC/X, Руководство пользователя

Страница: 71 / 391

AudioFile SCX user manual 71 Revision 0.91
he Threshold Recording defaults are:
ecording On Threshold (-20 to -50 )
recorded. This ca not be
et lower than the Recording Off Threshold. A vertical line on the recording level
4 dBs)
recorded when the level
rops. This can not be set higher than the Recording On Threshold. A vertical
ws the threshold.
llows a handle to be attached to the start of the recording. This handle is
ding and recorded as a cue
nce recording has been triggered.
Record Handle ( econds Frames)
g
seconds of extra
hreshold.
t time after the level drops below the
ay as a noise gate would operate.
T
R
Used to set the level at which the audio will start to be n
s
meters shows the threshold.
Recording Off Threshold (-20 to -6
Used to set the level at which the audio will stop being
d
line on the recording level meters sho
Pre Record Handle (Seconds Frames)
A
continuously written to the audio drive when not recor
o
Post S
Allows a handle to be attached to the end of the recordin .
or example, a pre and post handle of 2s would result in 2 F
audio before the start threshold and after the stop t
Record Hold Time (Seconds Frames)
Allows recording to continue for a pre-se
record off threshold, in much the same w
The Strip Silence Defaults are:
Strip Silence Confirmation
When set to Yes then the Strip Silence Local Defaults are shown for confirmation
before the Strip Silence is executed. Strip Silence can also be cancelled.
When set to No then Strip Silence will execute automatically on the selected Cue
or Event without further confirmation.
Delete Old Events
Used by Strip Silence in Assembly to remove the Event that has been selected
for Strip Silence. The old Event is deleted when the Strip Silence operation is
Jan 2008