AMS Neve AudioFile SC/X, Руководство пользователя

Страница: 203 / 391

ress the REPL SEG Trigger key. P
AudioFile SCX user manual 203 Revision 0.91
Jan 2008
a new Event which replaces the Events in the
rsor positions will be used to synchronise
he Cue will be spotted down as T
window. The Source and Assembly cu
lacement of the new Event. p
the Cue is short of either of the window limits, a If space will be created in the
is enough space
Assembly List.
Note that any preparatory edits to the Cue are ignored. If there
the window, the whole of the Cue will be used. in
oop a fixed number of times L
addition to looping a segment acros In s a window, a segment can be looped a
a required number of times
in Assembly.
d (Edit Loop uses the same functions as Trim Edit, except that the same
segment will repeat
op of the screen for numeric entry.
nt should be looped and press ENTER.
set number of times from the cursor position.
o Loop a segment T
e sure that no window is defined Mak
elect the required Cue in the Source Stack. S
If necessary, switch to SOURCE and use EDIT LOOP to adjust the segment as
quire re
segment is both start and end, allowing definition of how the
self, overlapping or not and or not). it
Press the LOOP SEG Trigger key.
box will be displayed at the t A
ype the number of times that the segme T