AMS Neve AudioFile SC/X Скачать руководство пользователя страница 316

Страница: 316 / 391

AudioFile SCX user manual

316

Revision

0.91

MEDIA UTILITIES PAGE

Used to initialise and rename hard disks, unload and reload removable media, catalogue

isks and import OMF files.

To access media utilities

mbly

Expanded A

The page shows the Cues on the first available hard disk.

isks in Media Utilities are displayed as volumes.

_ Press the MEDIA UTILITIES SoftKey in the Cues Page, Cut and Splice Asse

ccess Page or the Cut and Splice Source Cue Library Page.

INITIALISE A DISK

Used to initialise the audio directory on a disk.

This erases all audio on a disk and the process cannot be reversed. Caution should taken

henusing the initialise disk facility.

o initialise disks

_ Select the desired disk using either the DRIVE: SoftKey or the right-hand Softwheel.

If the drive key is used to select the disk

_ As each disk is selected its name will appear on the SoftKey (e.g. DRIVE: bank b).

_ Press the INIT DISK SoftKey.

Jan 2008

Содержание AudioFile SC/X








































































































































































































































































































































































































Результаты поиска

Содержание AudioFile SC/X

Отзывы:

AMS Neve AudioFile SC/X, Руководство пользователя, Страница: 316 / 391

Результаты поиска

Содержание AudioFile SC/X

Отзывы: