AMS Neve AudioFile SC/X, Руководство пользователя

Страница: 131 / 391

To use Program Locate
AudioFile SCX user manual 131 Revision 0.91
ow press the PROGRAM LOCATE SoftKey and type in the required value.
PAUSE
If PAUSE or STOP are pressed during a cycle, a ‘keep’ of the last recording is
made.
FINISHED
This will only function when a cycle has been set-up around Record Events.
The Record Events are always retained so that re-recording can commence.
Once satisfactory take/s are achieved the Record Event/s in the cycle can be
cleared by pressing FINISHED (when the cycle is completed).
NEXT
This Key is used to select Record Events sequentially from the list, the next
available Record Event in the list is enabled and all others disabled.
THIS
Record Events can be muted in EXPANDED ACCESS with the STATE Trigge
ey and selected Record Events enabled from the muted list using the THIS
VENT CYCLE LOCK
uickly make new recordings sequentially (one by one), use the
t without
stablishing new points.
oints are established to coincide with the list start/stop times of the Event.
vent and press the THIS Trigger Key, to then cycle
recordings are made during a cycle then recordings will be made every pass
until the STOP Key is pressed (all other Record Events are muted).
Press the LOCAL DEFS HardKey followed by the ENABLE PROGRAM LOCATE
SoftKey.
N
r
K
Trigger Key (when the cursor is positioned at an Event).
E
If you want to q
EVENT CYCLE LOCK SoftKey to set-up a cycle around another Even
e
P
irst select the required E F
around the next available Event press the NEXT Trigger Key.
If
Jan 2008