manualshive.com logo in svg

AMS Neve AudioFile SC/X, Руководство пользователя, Страница: 146 / 391

Поделиться
Скачать
AMS Neve AudioFile SC/X Скачать руководство пользователя страница 146

 

The Cues will still be tagged. The tagged Cues will be treated as a group for 
further operations. 

AudioFile SCX user manual 

146

 Revision 

0.91 

Select a tagged Cue and press the ADD TO SOURCE SoftKey. 
 
All the tagged Cues will be added to the Source Stack. If waveform display is 
enabled then the waveforms will be acquired as a background task. 
 

Other functions can be used with tagged Cues in Cue Library. 
 
To delete a Cue from the Source Stack 
 

Select the Cue using the left-hand Softwheel. 
 
Press the DELETE FROM SOURCE SoftKey. 
 

To clear the Source Stack 
 

Press the CLEAR SOURCE STACK SoftKey. 
 
A prompt will appear ‘This will remove X Cues press cancel or clear’ 
 
Press the CLEAR SoftKey to continue or CANCEL to quit. 
 

To copy Cues 

elect a Cue (or tagged Cue) using the right-hand Softwheel and press the CUE 

ill be copied. 

location and remove them 

 selected location. 

oftwheel (To 

 press CONTINUE to proceed or CANCEL 

same volume using the 

olume select keys. 

 

S
COPY SoftKey. 
 
If a tagged Cue was selected then all tagged Cues w
 
Press the MOVE SoftKey to copy Cues to the required 

rom the original location. 

f
 

hey will take their unique identifier with them (i.e. it will be the same). 

T
 
Press the COPY SoftKey to maintain the original Cue and create a copy with a 

ew unique identifier in the

n
 

se the left hand Softwheel (Copy Volume) and right hand S

U
volume) to select the destination and

o quit. 

t
 

opy to the same volume 

C
 

ues can be copied to the same volume by selecting the 

C
V

 
Jan 2008 

Содержание AudioFile SC/X








































































































































































































































































































































































































Отзывы:

Нет отзывов