manualshive.com logo in svg

AMS Neve AudioFile SC/X, Руководство пользователя, Страница: 285 / 391

Поделиться
Скачать
AMS Neve AudioFile SC/X Скачать руководство пользователя страница 285

 

AudioFile SCX user manual 

285

 Revision 

0.91 

 
To exit Filing 
 

Press the EXIT SoftKey to return to the original page (followed in Cut and 
Splice by pressing the EXIT EXPANDED ACCESS SoftKey). 
 

To clear both the Event List and the Source Stack 
 

Position the highlight over the ##NEW## file (using the left-hand Softwheel) 
and press the LOAD SoftKey. 
 
A prompt will appear as a reminder that this will erase all Events and the 
current Source Stack. 
 
Press the DELETE SoftKey to continue or CANCEL to quit.  
 

From within expanded access 
 

Press the DELETE MENU SoftKey. 
 
Press the DELETE ALL SoftKey. 
 

 prompt will appear as a reminder that this will erase all Events and the 

A
current Source Stack. 
 
Press the DELETE SoftKey to continue or CANCEL to quit. 
 

Saving 
 
Autosave 
 

Used to setup the system so that Event Lists are automatically saved after 

elect the period required (between 1 and 60 minutes) using the right-hand 

the numeric pad. 

o disable Autosave 

 

Set the interval to 0. 
 

fixed periods of time. 
 

To setup Autosave 
 

Press the DEFAULTS SoftKey in the Main Menu. 
 
Scroll through the default options using the left hand Softwheel (or Nudge 
Keys) to highlight ‘Autosave Interval 0-60 minutes (0=off)’. 
 
S
(Set Default) Softwheel (or Nudge Keys) or 
 
Press the EXIT SoftKey to confirm selection and return to the Main Menu. 
 

T

 
Jan 2008 

Содержание AudioFile SC/X








































































































































































































































































































































































































Отзывы:

Нет отзывов