manualshive.com logo in svg

AMS Neve AudioFile SC/X, Руководство пользователя, Страница: 35 / 391

Поделиться
Скачать
AMS Neve AudioFile SC/X Скачать руководство пользователя страница 35

 

Press the CUE LIBRARY SoftKey. 

 

 
The Cue Library page will be displayed. The bottom half of the screen will d
the Cues available on the first hard disk. 

isplay 

ource Stack. 

 
The right hand Softwheel is assigned to Cue selection on the hard disk(s). 
 
Notice also that the CUE LIBRARY SoftKey remains pressed. 
 
Use the right-hand Softwheel to highlight the required Cue. 
 
If Auto Audition is enabled then the Cue will play back automatically (see the Cut 
and Splice chapter for information on Auto Audition). 
 

 
The left hand Softwheel is assigned to Cue selection in the S

Press the ADD TO SOURCE SoftKey or press the ENTER key. 

 
The selected Cue will be shown in the Source Stack. The Source Stack is sorted 
alphabetically. 
 

There is effectively no limit to the number of Cues that can be placed in the Cue 
Stack (i.e. every Cue on the hard disk can be placed in the Cue Stack), but only 
nine Cues will be visible on the screen at any one time. 

 
AudioFile SCX user manual 

35

 Revision 

0.91 

 
Jan 2008 

Содержание AudioFile SC/X








































































































































































































































































































































































































Отзывы:

Нет отзывов