AMS Neve AudioFile SC/X, Руководство пользователя

Страница: 200 / 391

AudioFile SCX user manual 200 Revision 0.91
Windows in Assembly
Several operations in Assembly use a window in the Timeline. This is defined by
an in-point (the start of the window) and an out-point (the end of the window).
Once the window is defined, it can be used to loop a segment across the
window, delete Events, cut out the defined section (remove Events and close the
gap) or replace the window contents with a new Event.
To define the Window
Position the cursor at the required in-point.
y.
-point.
bly Window.
-POINT and SET WINDOW OUT-POINT can be pressed while
rigger keys will become RUB OUT and CUT
e
s Edits and Marks).
y one window can be defined.
the out point will be
t Mark or Edit that the cursor would select with the
eel. This also happens the other way round if SET
eys
Press the SET WINDOW IN-POINT SoftKe
A vertical line will show the in-point on the Assembly Window.
Position the cursor at the required out
Press the SET WINDOW OUT-POINT SoftKey.
vertical line will show the out-point on the Assem A
ET WINDOW IN S
auditioning the Event List (i.e. on-the-fly).
The RUB SEG and CUT SEG T
UT. O
hen the right hand Softwheel is used to Position the cursor, it will jump to th W
window in and out points (as well a
Onl
f SET WINDOW IN-POINT is pressed twice then I
automatically set to the nex
ight hand (Position) Softwh r
WINDOW OUT-POINT is pressed twice (i.e. the previous Mark or Edit is
automatically selected as the in point).
To remove the Window
Make sure the Event list is stationary (i.e. not in play or varispeeding).
Press the SET WINDOW IN-POINT and SET WINDOW OUT-POINT SoftK
so they are defined at the same point.
Jan 2008